+86-18157761287 
sales03@one-paper.com
+86-18157761287
sales03@one-paper.com
1) Check whether the compressed air pressure meets the requirements.
2) Remove the accumulated water in the air source treatment components, and observe the oil level in the lubricator at the same time. If the oil level is not enough, add it.
3) Clear the dust on the surface of each photoelectric sensor.
4) Clean the exposed surface of the folding machine.
1) Fill the sprocket and chain with lubricating oil and adjust the tension of the chain.
2) Adjust the tightness of the conveyor belt once.
1) Add lubricating oil once to each conveying roller.
2) The oil of the reducer should be changed once after the first 300 hours of operation, and once after 1500 hours of operation.
3) Check the tightness of each connection.
